Boat & Trailer Servicing
Boat Servicing
At 313 Marine, we will tailor your boat service to your specific make and model.
For our standard service, this will include:
Remove lower gearbox and replace water pump impeller. Re fit lower gearbox unit.
Change engine oil and oil filter
Touch-up the paint on the power package.
Change the crankcase oil and filter.
Change the drive unit oil. Retorque the connection of the gimbal ring to the steering shaft.
Replace the water separating fuel filter element.
Check the steering system and the remote control for loose, missing or damaged parts.
Lubricate the cables and the linkages.
Check the continuity circuit for loose or damaged connections.
Test the MerCathodeunit output on Bravo Models.
Clean the flame arrestor, IAC muffler (MPI engines), and the crankcase ventilation hoses.
Gearbox oil and re fill gearbox oil
Boat HIN Codes
The HIN identifies things like country, manufacturer, serial number and date of manufacture. The HIN is normally permanently attached to the vessel's hull.
Boat Code involves fixing a set of small plates (unless a manufacturer HIN has already been allocated) bearing a Hull Identification Number (HIN) to the hull of a vessel as a security measure. The HIN is similar to Vehicle Identification Numbers (VIN) on motor vehicle compliance plates.
Boat Code is compulsory when:
Registering a boat in NSW for the first time.
Applying for change of ownership of a vessel that does not have a HIN, or has a HIN that is not currently recorded in NSW.
A copy of the vessel’s registration certificate cannot be supplied.
If your vessel has a Boat Code from interstate but you cannot produce the Boat Code certificate, you will need to have the HIN validated by a Boat Code agent.
Cost for an HIN Code Inspection is $107, and takes 2 hours to complete.
Trailer Servicing
Our trailer servicing includes:
Trailer Lubrication/Greasing:
Inspect and Grease Couplings, Jockey wheel, suspension springs and hubs, hydraulic calipers (if fitted)
Tighten bolts:
Check coupling fasteners, ubolt leaf springs, rego plate holder, securing chain/shakle, welds and slides
Electrical System:
Check/ Inspect electric brakes (if fitted), wiring, winch connection, vehicle
cable condition, lights
Wheel Bearings:
Bearing repack
Wheels and Jockey:
Examine tyres and inflation on main tyres and check jockey wheel operation alignment.
Report of Condition:
report any findings from inspection that may impact availability
Brakes:
Inspect/adjust brake cable if fitted, calipers, discs.
Winch:
Check condition of cable, and oil shaft, brushes and gears,
Trailer Registration
We are a licenced to carry out trailer registration checks for trailers, box trailers and vehicles.
E-safety Check Pricing:
Trailer with Brakes $28.00
Trailer no brakes $25.00
Vehicle $49.00
